Contractor Badge Procedure

Badge making process.

STEP 1 Get into sine to see badge request workflows for new bade requests (this should be done 3-4 times a week)

Log into Sine.co with your SSO account (sps.bky.firstname.lastinitial@nucor.com)
Select work flows at the bottom left of the screen

A screenshot of a computerDescription automatically generated

Open the workflow NSBB Site Access Request and Contractor Orientation

A close-up of a person's faceDescription automatically generated

Select a record with out a tag assigned to it.

Scroll down till you get to length of time you will be working at Nucor Brandenburg

A red line with textDescription automatically generated

IF THEY SELECTED LESS THAN 2 WEEKS, OR SAID NO TO NEEDING A BAGE PLEASE FOLLOW THESE STEPS

On the left of the response screen, scroll down till you see Tags

A screenshot of a computerDescription automatically generated

Select “add tad”

A red arrow pointing to a white backgroundDescription automatically generated

Select “No Badge needed”

A screenshot of a computerDescription automatically generated

Close response window

IF THEY SELECT “2 WEEKS – TO 6 MONTHS” AND SAY YES TO HAVING A BADGE CREATED

Search your computer for an app called “Remote Desktop Connection”

A close up of a screenDescription automatically generated

Open the App

A screenshot of a computerDescription automatically generated

In the prompt where it says computer input “10.39.4.75” and select connect

A screenshot of a computerDescription automatically generated

You will get a credential pop up select “more choices” and select “use a different account”

A screenshot of a computerDescription automatically generated

Put in your username (sps.bky.firstname.lastinitial@nucor.com) and SSO password. Then select OK

A screenshot of a computerDescription automatically generated

A pop up warning about a certificate will appear. Select yes.

A screenshot of a computer error messageDescription automatically generated

If someone else is logged into this computer, a popup will appear Select yes if you would like to log in and kick them off their session.

A screenshot of a login boxDescription automatically generated

On the desktop of the machine select the folder called “TM Badges”

A screen shot of a computer screenDescription automatically generated

Double click the default templet “Default Contractor Badge (2 weeks - 6 month)”

A screenshot of a computerDescription automatically generated

Once cardPresso opens verify that it is the default contractor badge should look like the one below.

A white and orange tag with black textDescription automatically generated

If the right badge is open in the top right corner select the print button

A screenshot of a computerDescription automatically generated

In the print popup make sure “Evolis Primacy (Copy 1)” is the selected printer and hit “ok”

A screenshot of a computerDescription automatically generated

Open up Isonas URL - http://app.pureaccess.com/
Enter your email address and select continue

A screenshot of a login formDescription automatically generated

Enter your Isonas password (it is possible that this could be different then your Nucor password as Isonas is not SSO) then select continue

A screenshot of a login pageDescription automatically generated

Once logged in select the people icon on the left hand side of the screen.

A screenshot of a computerDescription automatically generated

Hover over the green plus on the right hand side of the screen and select create user.

A screenshot of a computerDescription automatically generated

Put in the users First name, last name, and email as appears on the sine workflow and select next

A screenshot of a computerDescription automatically generated

On user group select the user group that matches the “company you work for” question on the sine form and select next. ****if the company is not in user group please email nsbb.ithelp@nucor.com to get it added******

Isonas:

A screenshot of a computerDescription automatically generated

Sine Workflow:

A screenshot of a phoneDescription automatically generated

For credential type select badge and credential format select Isonas Prox

A screenshot of a phoneDescription automatically generated

Select enroll manually

For badge ID input the encoded number on the back of the card

A white rectangular object on a wood surfaceDescription automatically generated

A screenshot of a phoneDescription automatically generated

Select “special properties” and select “Time Limit.”

A screenshot of a computerDescription automatically generated

For the start date and end date please input the start time and expire time on the workflow pass and select next.

Isonas:

A screenshot of a computerDescription automatically generated

Sine:

A screenshot of a computerDescription automatically generated

In the review section, please review to make sure everything is accurate, and if it is, hit Create in the bottom right corner.

A red circle with blue textDescription automatically generated

To finish, hit the arrow in the top right corner and select Complie (anytime there is a change in isonas, you must compile, or the change will not take effect).

A screenshot of a computerDescription automatically generated

Please print a Dymo label with the contractor name and expiry date on the card and stick it on the back of the card.

Back in sine workflows on the left of the response screen, scroll down till you see Tags

A screenshot of a computerDescription automatically generated

Select “add tad”

A red arrow pointing to a white backgroundDescription automatically generated

Select “Badge Created”

A screenshot of a computerDescription automatically generated

Close the response window and you are done

IF THEY SELECT “MORE THEN 1 YEAR or 6 MONTHS – 1 YEAR” AND SAY YES TO HAVING A BADGE CREATED

Search your computer for an app called “Remote Desktop Connection”

A close up of a screenDescription automatically generated

Open the App

A screenshot of a computerDescription automatically generated

In the prompt where it says computer input “10.39.4.75” and select connect

A screenshot of a computerDescription automatically generated

You will get a credential pop up select “more choices” and select “use a different account”

A screenshot of a computerDescription automatically generated

Put in your username (sps.bky.firstname.lastinitial@nucor.com) and SSO password. Then select OK

A screenshot of a computerDescription automatically generated

A pop up warning about a certificate will appear. Select yes.

A screenshot of a computer error messageDescription automatically generated

If someone else is logged into this computer, a popup will appear Select yes if you would like to log in and kick them off their session.

A screenshot of a login boxDescription automatically generated

On the desktop of the machine select the folder called “TM Badges”

A screen shot of a computer screenDescription automatically generated

Double click the default templet “Default Contractor Badge (greater then 6 months)”

A number and a boxDescription automatically generated with medium confidence

Once cardPresso opens verify that it is the default contractor badge should look like the one below.

A close up of a company nameDescription automatically generated

Double-click the company name field and change it to the company name on the work flow

Sine:

CardPresso:

Double-click the first name field and change it to the first name on the work flow
Double-click the Last name field and change it to the Last name on the work flow

If the right badge is open in the top right corner select the print button

A screenshot of a computerDescription automatically generated

In the print popup make sure “Evolis Primacy (Copy 1)” is the selected printer and hit “ok”

In the top right corner select File

Then select save as

Select the folder contractors

Select the folder of the company the contractor is a part of

Save the badge in the company folder with the contractors name and company name in parentheses and select save

Open up Isonas URL - http://app.pureaccess.com/
Enter your email address and select continue

Enter your Isonas password (it is possible that this could be different then your Nucor password as Isonas is not SSO) then select continue

Once logged in select the people icon on the left hand side of the screen.

Hover over the green plus on the right hand side of the screen and select create user.

Put in the users First name, last name, and email as appears on the sine workflow and select next

On user group select the user group that matches the “company you work for” question on the sine form and select next. ****if the company is not in user group please email nsbb.ithelp@nucor.com to get it added******

Isonas:

Sine Workflow:

For credential type select badge and credential format select Isonas Prox

Select enroll manually

For badge ID input the encoded number on the back of the card

Select “special properties” and select “Time Limit.”

For the start date and end date please input the start time and expire time on the workflow pass and select next.

Isonas:

Sine:

In the review section, please review to make sure everything is accurate, and if it is, hit Create in the bottom right corner.

To finish, hit the arrow in the top right corner and select Complie (anytime there is a change in isonas, you must compile, or the change will not take effect).

Please print a Dymo label with the contractor name and expiry date on the card and stick it on the back of the card.

Back in sine workflows on the left of the response screen, scroll down till you see Tags

Select “add tad”

Select “Badge Created”

Close the response window and you are done

IF THE CONTRACTOR IS RENEWING THEIR WORKFLOW AND ALREADY HAVE A BADGE CREATED

Open up Isonas URL - http://app.pureaccess.com/
Enter your email address and select continue

Enter your Isonas password (it is possible that this could be different then your Nucor password as Isonas is not SSO) then select continue

Once logged in select the people icon on the left hand side of the screen.

Filter for the contractor you are looking for

Select the three dots on the far right side of the screen

Select Manage Credentials

Select the pencil icon under actions for their active credential

Select Special properties and extend the end date to the new end date on their latest work flow.

Click save

To finish, hit the arrow in the top right corner and select Complie (anytime there is a change in isonas, you must compile, or the change will not take effect).

Please print a Dymo label with the contractor name and expiry date on the card and stick it on the back of the card.

Back in sine workflows on the left of the response screen, scroll down till you see Tags

Select “add tad”

Select “Badge Created”

Close the response window and you are done